Teltonika RUT240 (RUT24006E000) to kompaktowy, solidny i wydajny router 4G LTE WiFi, dostosowany do profesjonalnych, przemysłowych zastosowań M2M / IoT, gdzie nie jest potrzebna duża przepustowość danych.
Router zapewnia wysoką wydajność dla komunikacji komórkowej. Wyposażony jest w dwa porty Ethernet, slot na kartę SIM oraz diody LED statusu mocy sygnału, które zapewniają łatwe zarządzanie siecią. Zewnętrzne złącza antenowe SMA umożliwiają podłączenie pożądanych anten i łatwe znalezienie najlepszej lokalizacji sygnału. W zestawie znajdują się dwie anteny Mobile i jedna WiFi.
Teltonika RUT240 wyposażona jest w procesor Qualcomm Atheros Hornet (MIPS 24Kc 400 MHz) oraz 64 MB pamięci RAM.
Urządzenie zapewnia bezpieczną i stabilną łączność internetową dla aplikacji przemysłowych z wykorzystaniem oprogramowania RutOS i funkcji bezpieczeństwa, takich jak OpenVPN, IPsec, Firewall, Hotspot, kontrola SMS i obsługa RMS. Zawartość zestawu:
- Router RUT240
- Zasilacz 9 W
- 2x anteny LTE (obrotowe, męskie SMA)
- 1x antena WiFi (obrotowa, męska RP-SMA)
- Kabel Ethernet (1,5 m)
- Zestaw adaptera SIM
- QSG (Przewodnik szybkiego startu)
- Ulotka RMS
- Pudełko do pakowania
Technologie:
- 4G (LTE) – CAT 4 do 150 Mbps
- 3G – do 42 Mbps
- 2G – do 236.8 kbps
- WiFi – do 150 Mbps
- GPRS
- Ethernet – 2 porty
- SMS
Cechy sprzętowe:
- Wyjście cyfrowe – 1x
- DIN – Wejście cyfrowe – 1x
- Slot na kartę SIM - 1x
- LAN 10/100Mbps port Ethernet 1x
- WAN 10/100Mbps port Ethernet 1x
- Standardy Wi-Fi: IEEE 802.11b/g/n
- Wytrzymała aluminiowa obudowa
- Złącza anten LTE – 2x SMA
- Złącza anten Wi-Fi – 1 x RP-SMA
- Obsługiwane napięcie wejściowe – 9-30 VDC
- Temperatura otoczenia podczas pracy – -40°C to 75° C
- Zużycie energii – < 5W
- Opcje montażowe – DIN RailWall
- Kontrolki LED – 3x Status połączenia, 5x Siła sygnału, 1x Zasilanie
Oprogramowanie:
- Tryb Bridge
- Statyczny routing
- NTP
- Hotspot Wi-Fi
- Tryb Wireless Client
- Tryb Wireless AP
- Ping reboot
- Okresowe ponowne uruchomienie
- Wykresy w czasie rzeczywistym
- Łącze zapasowe poprzez port WAN
- Licznik transmisji mobilnej
- Pasek stanu połączenia
- Tworzenie/przywracanie kopii zapasowych
- VRRP
- IPsec
- GRE Tunnel
- OpenVPN
- PPTP
- SNMP
- SNMP Trap
- Wysyłanie i odbieranie SMS
- Status poprzez SMS
- Restart poprzez SMS
- Włączanie / wyłączanie za pośrednictwem SMS
- Włączanie / wyłączanie sieci Wi-Fi za pośrednictwem SMS
- Włączanie / wyłączanie OpenVPN za pośrednictwem SMS
- Filter Web
- Limit danych mobilnych
- Profile konfiguracji
- Rejestrowanie zdarzeń
- QoS
- FOTA (Firmware Over The Air)
- Wyłączanie roamingu
- brama SMS
- Bezpieczeństwo kontroli dostępu
- VLAN
- CLI
- Firewall
- Filtrowanie IP/MAC
- Serwer DHCP
- Dynamiczny DNS
- Wsparcie RMS
LTE:
- LTE FDD: B1/B3/B5/B7/B8/B20
- LTE TDD: B38/B40/B41
- LTE CAT4 do 70 Mbps
- Class 3 (23dBm±2dB) dla LTE FDD
- Class 3 (23dBm±2dB) dla LTE TDD
UMTS/DC-HSPA+:
- 850/900/2100 MHz
- DC-HSPA+ mode: Max 42Mbps (DL) Max 5.76Mbps (UL)
- UMTS mode: 384 kbps DL, 384 kbps UL
- TD-SCDMA: Max 4.2Mbps (DL) Max 2.2Mbps (UL)
- Power Class 3 (24dBm +1/-3dB) for UMTS bands
- Class 3 (24dBm+1/-3dB) for TD-SCDMA
GSM/GPRS/EDGE:
- 900/1800 Mhz
- GPRS/EDGE Multi-slot Class 12
- Power Class E2 (27dBm ±3dB) for EDGE 850/900
- Power Class E2 (26dBm +3/-4dB) for EDGE 1800/1900
- Power Class 4 (33dBm ±2dB) for GSM 850/900
- Power Class 1 (30dBm ±2dB) for GSM 1800/1900
ETHERNET:
- Standardy IEEE 802.3, IEEE 802.3u
- 1 x port LAN 10/100Mbps Ethernet
- 1 x port WAN 10/100Mbps Ethernet
- Wsparcie auto MDI/MDIX
WIFI:
- Standardy WiFi: IEEE 802.11b/g/n
- Tryby: AP oraz STA
- Szyfrowanie 64/128-bit WEP, WPA, WPA2, WPA&WPA2
- Zakres częstotliwości Wi-Fi: 2.401-2.495GHz
- Maks. moc TX: 20dBm
- Tryb ukrywania SSID i kontrola dostępu oparta na adresie MAC
MOBILE
|
|
Mobile module
|
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps. |
Status
|
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received |
Bridge
|
Direct connection (bridge) between mobile ISP and device on LAN |
SMS
|
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
Black/White list (optional)
|
Operator black/white list |
Multiple PDN (optional)
|
Possibility to use different PDNs for multiple network access and services |
Band management
|
Band lock, Used band status display |
WIRELESS
|
|
Wireless mode
|
IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
WiFi
|
WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter |
WiFi security
|
WPA2-Enterprise - PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation |
SSID
|
SSID stealth mode and access control based on MAC address |
WiFi users
|
up to 50 simultaneous connections |
Hotspot
|
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
ETHERNET
|
|
WAN
|
1 x WAN (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
LAN
|
1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
NETWORK
|
|
Routing
|
Static routing, Dynamic routing (Optional - BGP, OSPF v2, RIP v1/v2) |
Network protocols
|
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT (optional) |
VoIP passthrough support
|
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
Connection monitoring
|
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall
|
Port forward, traffic rules, custom rules |
DHCP
|
Static and dynamic IP allocation, DHCP Relayd |
QoS
|
Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
DDNS
|
Supported >25 service providers, others can be configured manually |
Network backup
|
VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover |
Load balancing
|
Balance your internet traffic over multiple WAN connections |
NetSnapper (optional)
|
Mobile connection management, data compression VPN client (not available in standard FW) |
SSHFS (optional)
|
Possibility to mount remote file system via SSH protocol (not available in standard FW) |
SECURITY
|
|
Authentication
|
Pre-shared key, digital certificates, X.509 certificates |
Firewall
|
Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
Attack prevention
|
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
WiFi security
|
WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes, Client separation |
VLAN
|
Tag based VLAN separation |
Mobile quota control
|
Set up custom data limits for the SIM card |
WEB filter
|
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
Access control
|
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN
|
|
OpenVPN
|
Multiple clients and server can be running simultaneously, 12 encryption methods |
OpenVPN Encryption
|
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec
|
IKEv1, IKEv2, supports up to 4x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE
|
GRE tunnel |
PPTP, L2TP
|
Client/Server services can run simultaneously |
Stunnel
|
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code. |
SSTP
|
SSTP client instance support |
MONITORING & MANAGEMENT
|
|
WEB UI
|
HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log |
FOTA
|
Firmware update from sever, automatic notification. |
SSH
|
SSH (v1, v2) |
SMS
|
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
TR-069 (optional)
|
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems |
MQTT (optional)
|
MQTT Broker, MQTT publisher |
SNMP
|
SNMP (v1, v2, v3), SNMP trap |
JSON-RPC
|
Management API over HTTP/HTTPS |
MODBUS
|
MODBUS TCP status/control |
RMS
|
Teltonika Remote Management System (RMS) |
SYSTEM CHARACTERISTICS
|
|
CPU
|
Atheros Hornet, MIPS 24Kc, 400 MHz |
RAM
|
64MB, DDR2 |
FLASH memory
|
16MB SPI Flash |
FIRMWARE / CONFIGURATION
|
|
WEB UI
|
Update FW from file, check FW on server, configuration profiles, configuration backup, restore point |
FOTA
|
Update FW/configuration from server |
RMS
|
Update FW/configuration for multiple devices |
Keep settings
|
Update FW without losing current configuration |
FIRMWARE CUSTOMIZATION
|
|
Operating system
|
RutOS (OpenWrt based Linux OS) |
Supported languages
|
Busybox shell, Lua, C, C++ |
Development tools
|
GPL package with built environment provided |
INPUT/OUTPUT
|
|
Input
|
1 x Digital Input |
Output
|
1 x Digital Output |
Events
|
SMS, EMAIL, RMS |
POWER
|
(zasilacz w zestawie) |
Connector
|
4 pin industrial DC power socket |
Input voltage range
|
9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33VDC 10us max. |
PoE (passive)
|
Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at |
Power consumption
|
< 5 W |
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
|
|
Ethernet
|
2 x RJ45 ports, 10/100 Mbps |
Status LEDs
|
3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1x Power LED |
SIM
|
1 x SIM slot (Mini SIM – 2FF, 2st form factor), 1.8V/3V, external SIM holder |
Power
|
4 pin DC connector with 1 x Digital input and 1 x Digital output |
Anntenas
|
2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors |
Reset
|
Reset/restore to default button |
PHYSICAL SPECIFICATION
|
|
Casing material
|
Aluminum housing, plastic panels |
Dimensions
|
83 mm x 74 mm x 25 mm (H x W x D) |
Weight
|
125 g |
Mounting options
|
Bottom and sideways DIN rail mounting slots |
OPERATING ENVIRONMENT
|
|
Operating temperature
|
-40 °C to 75 °C |
Operating humidity
|
10% to 90% non-condensing |
Ingress Protection Rating
|
IP30 |
MTBF
|
310000 h |
REGULATORY & TYPE APPROVALS
|
|
Regulatory
|
CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance (in progress) |
Operator
|
AT&T (in progress), Verizon (in progress) |
Vehicle
|
ECE R10 (E-mark) (planed) |
EMI IMMUNITY
|
|
Standards
|
Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0 FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014) |
ESD
|
EN61000-4-2:2009 |
RS
|
EN 61000-4-3:2006 + A1:2008 + A2:2010 |
EFT
|
EN 61000-4-4:2012 |
Surge protection
|
EN 61000-4-5:2006 |
CS
|
EN 61000-4-6:2009 |
DIP
|
EN 61000-4-11:2004 |
RF
|
|
Standards
|
EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1 FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017) RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1 AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017 |
SAFETY
|
|
Standards
|
IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013 AS/NZS 60950.1:2015 EN 50665:2017, EN 62311:2008 FCC 47 CFR Part 1 1.1310 RSS-102 Issue 5 (2015) |
|